Thickness and Density of Aluminum Plate for Sale

Publish: Mar 28, 2023Modify: Mar 28, 2023Author: DollyFrom: Haomei Haomei

The density of aluminum plate for sale will naturally vary, ranging from 2.7 to 2.84 due to different alloys. At present, the common thicknesses of aluminum plate are 0.3 mm, 3.0 mm, 6.0 mm, 7.0 mm, 9.0 mm, 10.0 mm, etc.

Due to different aluminum alloys, the the added alloy elements are different, and the density of aluminum plate for sale will naturally vary, ranging from 2.7 to 2.84. The density of pure aluminum plate is 2.71, represented by 1060 aluminum sheet. The aluminum content in this series of products exceeds 99%.

The density of 2xxx aluminum sheet is about 2.78 for it has high copper content, usually about 3-4%. So its density is higher than ordinary pure aluminum. The typical grade is 2024 aluminum sheet. The density of 3xxx aluminum is 2.73, mainly because it contains manganese alloy inside.

aluminum plate for sale.jpg

The density of the 5 series aluminum plate is relatively light, because 5xxx aluminum sheet has 3-4% Mg content and the density of the magnesium alloy is lower than that of aluminum. 6xxx aluminum sheet contains magnesium alloy and silicon alloy inside, and the density of 6000 series aluminum is basically around 2.7 after neutralization.

Aluminum Sheet Density

1000 aluminum sheet: 0.00271 kg/m³

2000 aluminum sheet: 0.0028 kg/m³

3000 aluminum sheet: 0.00273 kg/m³

6000 aluminum sheet：0.00275 kg/m³

7000 aluminum sheet: 0.00285 kg/m³

Density Table of Typical Aluminum Sheet Grades

3004	2.72
3005	2.73
3102	2.71
3103	2.73
3104	2.72
3105	2.72
4004	2.65
5005	2.7
5019	2.65
5052	2.68
5083	2.66
5086	2.66
6060	2.7
6061	2.71

Aluminum Sheet Weight

Aluminum plate weight (kg)=2.8*thickness×width×length/1000000 (Note: all the above measurement units are mm.)

Aluminum plate weight (kg)=2.8*thickness×width×length (note: the unit of thickness is mm. The unit of width and length is meter)

Thickness of Aluminum Plate

At present, the common thicknesses of aluminum plate are 0.3 mm, 0.6 mm, 0.7 mm, 1.0 mm, 1.8 mm, 2.0 mm, 2.8 mm, 3.0 mm, 6.0 mm, 7.0 mm, 9.0 mm, 10.0 mm, 12.0 mm, 14.0 mm , 18.0mm, 20.0mm, 25.0mm, 30.0mm, 40.0mm, 60.0mm and 70.0mm and 80.0mm and so on.